Loading

Fate/Stay Night Unlimited Blade Works - Emiya Shirou - Real Action Heroes  (No.736) - 1/6 (Medicom Toy)Fate/Stay Night Unlimited Blade Works - Emiya Shirou - Real Action Heroes (No.736) - 1/6 (Medicom Toy)¥ Kaufen¥ Kaufen

Japan's #1 Collector Toy Company
Fate/Stay Night Unlimited Blade Works - Emiya Shirou - Real Action Heroes  (No.736) - 1/6 (Medicom Toy)
Kategorie
Materialien
Maßstab & Abmessungen
1/6  H=300mm (11.7in, 1:1=1.8m)
Erscheinungs Datum
05/31/2016 As Limited + Exclusive
Preis
Auf Japanisch14,427 Hits • 31 Kommentare9 Favouriten

Kaufen

Informationen

Orders can be placed from 24th August 2015 0:00 JST to 5th October 23:59 JST 2015 via Medicom, Rakuten, Yahoo, CJ Mart and for overseas customers CJ Mart

Kommentare31

In stock @ Solaris Japan

Pre Owned for ¥80,270
└ Check product page for item condition.
In stock @ Neokyo
Today, 32999 yen on Amazon Japan.
Buy through Neokyo: neokyo.com/sear...
Only ¥250 fee, 45 days free storage.
Vor 3 Monaten
www.amazon.com/...

Around 320$ plus shipping
Vor 1 Jahr
A7xMadVor 2 Jahren#37724634why not just contact medicom directly? I know someone who had a problem with a broken joint for their RAH and they fixed it. He payed for shipping though.
I would have if something broke. But nothing broke. It was just super stuck. I was able to get everything loose through the process I ranted about. :)
Vor 2 Jahren
OkenoVor 3 Jahren#24689880I wanted to save this for a review post I'm trying to find time to make, but I feel I need to rant. My RAH Shirou had multiple stuck joints - extremely frustrating. Each knee was stuck in one of the joints (RAH knees are double-jointed) so they weren't able to bend properly until I worked them free (careful wiggling got both of them free).
Worse than that, much worse, each of the upper arm swivels (where the upper arm goes onto a peg in the shoulder joint) were stuck solid. This limited poseability to the extreme because if the arm can rotate at the shoulder the elbows are basically limited to bending in one direction. It took me two days (about an hour per day) and multiple methods (first heating with a hair dryer, which did almost nothing and second using close-to-boiling water poured in a cup and holding it in) and EXTREMELY careful wiggling and finally pushing the upper arm further into the peg to finally crack (serious, I heard a crack) whatever plastic inside the arm had frozen it to the peg.
Also frustrating is to fix all four of these frozen joints, I had to take all of the clothes off the figure. Unlike RAH Rin, who has two outfits and therefore all the outfits are designed to go on and off, Shirou's clothes are not designed to come off easily (very little velctro). I had to take his head off to get his undershirt off, for example. Fortunately, poseability of the arms is quite good that it is easy to carefully get them in the right position to pull his arms out.
By a miracle, I was able to safely loosen up all the joints and now they all work, which will be good for pictures for the review. And I discovered a lot about his design that I will save for my review.
But my thumbs and index finger tips are still sore from the pushing, pulling, burning (on hot water), etc.
It makes me wonder if very many other people had similar problems with theirs.
End rant.
why not just contact medicom directly? I know someone who had a problem with a broken joint for their RAH and they fixed it. He payed for shipping though.
Vor 2 Jahren
.
Vor 2 Jahren
In stock @ GoodsRepublic
Free Shipping woldwide from Japan.
Sold at Goods Republic ==> goodsrepublic.c...
.
Vor 2 Jahren
If someone sells his, I'm interested! Thank you!
Vor 2 Jahren
Japan's #1 Collector Toy Company

Bilder77

Ähnliche Artikel

Community

Im Besitz von
Bestellt von
Gewünscht von
Zum Verkauf von
Rezensiert von
Erwähnt in
Aufgeführt in
Durchschnittliche Bewertung
9.75/10 4 mal bewertet

Entsprechende Clubs1

Verlauf 5

Hinzugefügt von
Siona Vor 5 Jahren
Zuletzt bearbeitet von
Siona Vor 4 Jahren