StartseiteBlogsArtikel #34105

Best wall shelves?Best wall shelves?

Hey everyone!
So I'm in the market for some decent wall shelves to house some of my collection. I recently was using two invisible shelves with a 36" length each. Unfortunately due to the weight of the shelf itself + my added few figures it was beginning to hang lower and lower. Now mind you I only had a couple of items on this shelf that dont have any extremely significant weight, so the real issue lies in my walls/drywall being too weak to hold shelves like that.

Anyway, I was thinking of getting new ones with maybe L brackets to offer more support but I wanted to see what MFC suggests. What type of shelves do you use for your figures/statues?
1,322 Hits • 3 Kommentare


Years ago I put up white 3/4" slatwall plyboard (4x8) over the plaster walls, fastening to the studs behind. For display I used 12" long acrylic shoe holders (SW22). One shoe holder could support about 5 lbs. Worked well for diecast trucks. One drawback was cleaning off dust since this is not an encasing method; rather, open display.
Vor 1 Jahr
Invisible shelves will have a limit of how much they can hold - so you may have to go for bracketed shelves to further distribute the weight. Will also second using the drywall (aka plasterboard in the UK) screws.

I've got some twinslot shelving mounted on plasterboard, and they're still up. Don't think there's anything super-heavy on it, most of my figures are pretty light tbh, but no issues to report.

If you want something less visible, there are pelican brackets. They'll usually quote the max weight for them, so you can calculate if the shelf+figures will be too much for them. Again, ones into plasterboard, we used plasterboard screws.
Vor 1 Jahr
I have installed many wall shelves in my room both on drywall and plaster. For Drywall, I use shelf drilling drywall screws


I found they held the L bracket very well.

Working with plaster I found was an bitch. I need to buy an drill and buy these


The hardware store in my local area had a good price for white board that is 1 ft by 8 ft. I got them to cut them into sections.

I'm going to make a post later on this month and how I installed mine.

The brackets I used for my wall was similar to this

Vor 1 Jahr
Buy Anime figurines and japanese popculture collectibles at figuya.com

Über diesen Blog

Welcome to my blog!

More by hatterinsanity+

Ähnliche Artikel


Entsprechende Clubs