Spider-Gwen - Amazing Yamaguchi No.004 - Revolte...Spider-Gwen - Amazing Yamaguchi No.004 - Revoltech (Kaiyodo)

This item is currently on sale @Plamoya (MFC Partner) (1% Off)!

Kaufen

Releases

Bilder

Loading...

© Kaiyodo / Marvel / Yamaguchi Katsuhisa

Mehr anzeigenKommentare (45)

0Vor 17 StundenSolarisJapanSolarisJapan
In stock @ Solaris Japan (¥6,100)

Brand New for ¥6,100
└ A treasure is waiting for you! ✗
#24987068 // Sponsored by Solaris Jap...
0Vor 17 StundenPLAMOYAPLAMOYA
#24986461 // Sponsored by Plamoya (MF...
0Vor 1 TagNinomaNinoma
In stock @ Ninoma (¥5,834)

Product page : [ext link ]
Official new item , shipped worldwide from Japan
About 52 USD | 47 EUR | 69 CAD
#24939616 // Sponsored by Ninoma
0Vor 7 Tagenmedusoidmedusoid
This is such a great figure, I'm having a lot of fun coming up with poses for it. :)
0Vor 19 TagenPlazaJapanPlazaJapan
In stock @ PlazaJapan
Please check our product page for more details → [ext link ]
#24286419 // Sponsored by PlazaJapan
0Vor 1 MonatTwinkieSupremeTwinkieSupreme
goliathfasa (Vor 1 Monat) #23710370Finally got time to take some pictures and post them.
My guess is also that the hole in the lower leg piece is set at an off angle. The revol joint itself looks to be fine.
(mfc link)
(mfc link)


From the looks of it, it's highly likely due to the drilled hole on the leg. The position's a bit lower than how it's supposed to be placed.
0Vor 1 Monatgoliathfasagoliathfasa
TwinkieSupreme (Vor 1 Monat) #23523028Hmmmm. could you put up some pictures? My hunch is either the joint's range is off or that the drilled hole is at a off angle. Both of which are somewhat rare but are very evident in Revoltech figures. QA for Revoltech tends to be a mixed bag.
Finally got time to take some pictures and post them.

My guess is also that the hole in the lower leg piece is set at an off angle. The revol joint itself looks to be fine.

(mfc link)
(mfc link)
1Vor 1 Monat (Vor 1 Monat)Spartan719Spartan719
goliathfasa (Vor 1 Monat) #23520158Well one leg straightens out perfectly, while the other one seems bent at an angle.
And I think it's the knee. Maybe the socket at the lower leg where the knee revo joint goes in is set crooked?


Pop off the right hip part (that connects the thigh to the t-bar) and check for an "L" on the inside. I think I had the same problem. Mine had 2 left hips, so the left leg was perfect, but the right leg always was off

[Edit]

Whoops, Didn't see you said lower leg. Problem might be he same. QC might have messed up and given you 2 lower left legs
1Vor 1 MonatTwinkieSupremeTwinkieSupreme
goliathfasa (Vor 1 Monat) #23520158Well one leg straightens out perfectly, while the other one seems bent at an angle.
And I think it's the knee. Maybe the socket at the lower leg where the knee revo joint goes in is set crooked?


Hmmmm. could you put up some pictures? My hunch is either the joint's range is off or that the drilled hole is at a off angle. Both of which are somewhat rare but are very evident in Revoltech figures. QA for Revoltech tends to be a mixed bag.
0Vor 1 Monatgoliathfasagoliathfasa
TwinkieSupreme (Vor 1 Monat) #23508750Is that the knee joint? If it is, it's a case to case basis but from my experience with Revoltech figures, their joint system or joints per se don't always have the same range. You'll have to work around it if you want to give Revoltech figures vanilla poses.
Well one leg straightens out perfectly, while the other one seems bent at an angle.

And I think it's the knee. Maybe the socket at the lower leg where the knee revo joint goes in is set crooked?

Mehr Kommentare Anzeigen

Gemeinschaft

Entsprechende Clubs (0)

Mehr anzeigenListen (8)